Pairing and Assigning Sunmi Cloud Printer, using Bluetooth

Pairing and Assigning Sunmi Cloud Printer, using Bluetooth

<space>

On the Sunmi Cloud Printer hardware > Power On > press and hold for 3 seconds Pairing Button > release > subtle sound of a motor from the Printer

Wait greeting message from Printer "Welcome to the era of intelligent cloud printing". After press and hold Pairing Button, wait for pairing message from Printer "Please find your device". 

<space>

<space>

On the POS hardware > Settings > Connections > Bluetooth > pair devices

NOTE : Upon successful connection, take note of a very soft but subtle sound from the Printer motor.

<space>

Assigning Sunmi Cloud Printer using Bluetooth

Utilise Bluetooth if the distance between the POS Device and Printer is not too far. Recommended not further than 5 metres, with unobstructed line of sight. 

NOTE : Electronic devices and walls with metal lining will disrupt bluetooth connection. Do not place printers on top of electronic devices, or behind metal lining walls.

<space>

Bluetooth Printer that has been Paired will show here

Utilise Bluetooth if the distance between the POS Device and Printer is not too far. Recommended not further than 5 metres, with unobstructed line of sight.

<space

Assign Printer according to the relevant Kitchen Stations

Select associated Printers to Kitchen Station. An icon of assigned will show beside Printers that have been successfully Assigned.

<space>


- END -

    • Related Articles

    • Pairing and Assigning Sunmi Cloud Printer, using LAN

      <space> Plug LAN cable into the Sunmi Cloud Printer hardware > Power On > press Pairing Button three times quickly > see print out with IP address Wait greeting message from Printer "Welcome to the era of intelligent cloud printing". After triple ...
    • Pairing and Assigning Printer on Castle S1F

      Pairing and Assigning Printer on Castle S1F Click Settings > Printer Devices Check that your Printers are assigned correctly. Printers To assign Printer to your in-built Castle S1F, click on the unassigned printer. A pop-up box will appear. Select ...
    • Pairing and Assigning GPrinter GP-2120TU (Label Sticker)

      Connect the Power to the Printer > leave it near the POS.  On the POS Hardware > Settings > Bluetooth > connect device Customers queue to Order, Purchase at the counter, then pay before their food is served. [Heading 3] Examples : Fast Food, Bubble ...
    • Star mPOP Receipt Printer and Cash Drawer Combo

      <space> On Tablet Settings > switch on Bluetooth > look for Star mPOP device > Pair device <space> Pop up screen to confirm Pairing > click Ok Star mPOP device will show on the list of Paired Devices <space Go to Lunchbox POS App > Settings > Printer ...
    • Create Printer (KDS)

      Create individual Printer (KDS) Printers should be labelled according to the Kitchen Station that you require. NOTE : There must only be one Cashier Printer. <space> Create Sticker Label Sticker Label can be linked to a sticker printer where ...